Stop your GoPro's housing from fogging up in cold or humid environments, perfect for snowboarders, skiers or watersports enthusiasts. Fits with ANY GoPro.
Product ID: 57046 AHDAF-301 818279010121
If your camera casing mists or fogs up, then you're never going to be able to see any of the awesome footage. The Anti-Fog inserts slip nicely into the sides of the casing and will absorb moisture from the gaps to stop any mist from appearing. They come with 15 inserts and are good for 4 uses, but they are reusable, all you need to do is dry them in an oven for 3 minutes (not too hot though, you'll set the kitchen on fire!) These are a must for any skier, snowboarder, surfer, wakeboarder or anyone planning to use their GoPro in cold or humid environments.
Drop inserts into sides of camera housing to prevent fogging in cold and humid environments. To Reuse: Inserts will last for approximately 4 uses. To dry out and reuse, heat inserts on a pan in oven at 300° F for 5 minutes. Store in an airtight bag. For use with all GoPro cameras.
Reusable:- Good for 4 uses, then simply dry them on a low heat in the oven and you'll get even more use out of them.
15 Anti-Fog Inserts
We have selected the following pages from our Advice Centre as possibly the most relevant for you.
These inserts solved the problem of misted up lens, especially when having to open the casing to change a battery on the ski slope in wet conditions. They are quite fiddly to get into the gap between the camera body,without affecting the closure of the casing so best to try out a few times indoors. They can be regenerated in the oven but havent needed to do this yet as tgere sre plenty of spares in the pack.