- Home
- Ski Equipment
- Black Crows Mirus Cor Skis
This product is currently unavailable
About the Black Crows Mirus Cor
The Mirus Cor is a ski designed to provide the best of the worlds of freestyling and carving. Black Crows' COR acronym can be found on products that want to challenge the status quo with a dose of creativity and innovation.
Built with a fairly long rocker tip and tail, the Mirus Cor allows short curves for playing on the piste and the rocker profile makes the ski more than capable of dipping off to seek fresh snow on the side. It approaches carving in the traditional approach of energy and playfulness with its short contact points and a turning radius of just 13m.
The Black Crows Mirus Cor has an intermediate and responsive flex due to the Poplar wood core which provides liveliness to add stability and power for high-performance skiing.
A semi-cap construction helps the ski stay versatile - the sidewall along the midsection of the ski adds even more to the superb stability, but the cap over the tips and tails works perfectly with the rocker profile to allow playful turn shapes.
The Black Crows Mirus Cor is for skiers that are happy on all runs on the mountain but want a playful and energetic ski and enjoy putting in as many carves on the way down as possible. This is not a ski to be straight-lined or charged, this ski wants to be on its edge!
- Semi-Cap - A semi-cap construction gives the strength of vertical sidewalls, and also makes the skis easier to pivot
- Poplar / Fiberglass Wood Core - This is a lively core that gives stability and power for high-performance skiing
- Titanal Reinforcement - A single titanal layer reinforces where bindings are mounted for strength and power transmission
- Double Rocker with Fish Tail - Great handling, control, and pivot
- Classic Medium Camber - Classic camber under the foot with intermediate ski/snow contact: balance between stability and handling
- ABS Sidewall - ABS construction running around the entire sidewall adds strength and increases ski/snow contact
- Designed For - 50% all-terrain / 50% piste
- Rider Profile - Intermediate-Expert
- Camber Profile - Semi cap
- Base - Sintered
- Flex - Responsive
- Bindings - Not Included - Bindings available here
- Binding Mounting - Will need to be professionally drill mounted
- Condition - Brand New, factory waxed - ready to ride
- Weight - 3600g (178cm Pair)
Length (cm) |
Nose Width (mm) |
Waist Width (mm) |
Tail Width (mm) |
Turn Radius (m) |
168.3 |
131 |
87 |
121 |
13.0 |
173.2 |
131 |
87 |
122 |
13.0 |
178 |
134 |
87 |
123 |
13.0 |
184.2 |
135 |
87 |
125 |
13.0 |