Volkl Rise Above 88
30 days to
About the Volkl Rise Above 88
The Rise Above 88 is Volkl's all-mountain and touring ski built for demanding alpinists operating in high-altitude environments. The technology offered in Above 88 provides equal strength both uphill and downhill.
The Above 88 weighs in at only 1190g (at 170cm) thanks to a Tourlite Woodcore which uses a blend of beech under the binding and poplar plus paulownia in the outer regions. This combination has a great strength-to-weight ratio, whilst maintaining a snappy character. To ensure fantastic downhill performance, Volkl has used a 3-radius sidecut: R1=Tall Radius / R2=Center-Main Radius / R3=Tip Radius. This combines 3 sidecuts into one to achieve an agile ski that can both hold long carves on fresh groomers and short nippy turns to navigate through tricky terrain.
To help uphill efficiency, Volkl uses its Smart-Clip technology, a system that makes it easier for a rider to put on and take off a skin. Normally, a standard snap hook skin can only be attached and detached from the back of the ski, but a Smart-Clip skin can be taken off and put on at the back or the front due to its elastic snap hook. The Rise Above 88 has slight depressions in the ski tip to stop the skin from unintentionally releasing.
The Rise Above 88 is a lightweight, highly manoeuvrable ski for experienced, high-level riders which has a unique blend of both strong uphill and downhill performance.
- Tourlite Woodcore - Use of two woods for different areas of the ski. Beech is used underfoot to provide stability and secure screw retention. Poplar plus Paulownia at either end provides resilience and snap
- Tip - Rocker at the tip with a camber provides stability and performance on hard pack with float and easy of use
- 3D Radius Sidecut - Three radii in one ski for maximum turning & speed versatility in all mountain skiing
- Smart Skin Clip - A Skin clip system which offers the rider more flexibility. The skin can be attached and take off from both the tip and tail of the ski.
- Weight - 1190g without binding.
- Designed For - 50% Tour / 50% piste
- Rider Profile - Advanced / Expert
- Camber Profile - Tip rocker
- Base - Sintered Base
- Flex - Medium to Stiff
- Bindings - Not Included - Bindings available here
- Binding Mounting - Will need to be professionally drill mounted.
- Condition - Brand New, Factory Waxed - Ready To Ride
Length (cm) |
Nose Width (mm) |
Waist Width (mm) |
Tail Width (mm) |
Turn Radius (m) |
170 |
131 |
88 |
111 |
(R1) 25, (R2) 15, (R3) 22 |
